AISI L6 Tool Steel is one of alloy, oil-hardening tool steel in ASTM A681 standard. Some equivalent steel is 1.2714, 55NiCrMoV7, SKT4, BH224/5 steel.
A2 Tool Steel | 1.2363 | X100CrMoV5 | SKD12 | BA2 Steel
Jeremy He2023-11-07T15:25:14+08:00ASTM/AISI A2 tool steel is a versatile, air hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required.
ASTM H12 Tool Steel | 1.2605 | X35CrWMoV5 | SKD62 | BH12
Jeremy He2023-11-07T15:24:47+08:00AISI H12 steel is a 4.75~5.5% chromium, general-purpose hot work tool steel. ASTM/AISI H12 Steel is a deep-hardening, air-hardening steel that exhibits minimal size change during heat treatmnet.
AISI H11 Tool Steel | 1.2343 | X37CrMoV5-1 | SKD6 | BH11
Jeremy He2023-11-07T15:25:27+08:00AISI H11 tool steel is a 5% chromium hot work tool steel. H11 tool steels have the higher toughness, with some reduction in wear resistance and temper resistance.
ASTM H10 Tool Steel | 1.2365 | 32CrMoV12-28 | SKD7 | BH10
Jeremy He2023-11-07T15:25:56+08:00H10 Tool Steel is one chromium hot-work tool steel that exhibits excellent resistance to softening at elevated temperature. H10 tool steel is recommended for difficult hot work tooling applications.
O1 Tool Steel | 1.2510 | 100MnCrW4 | SKS3
Jeremy He2023-11-07T15:28:39+08:00AISI / ASTM A681 O1 Tool Steel is a low alloy cold work tool steel that must be oil-quenched in heat treatment. Tools and dies made from O1 Flat Ground will have good wearing and abrasive qualities.
D3 Cold Work Steel | 1.2080 | X210Cr12 | SKD1
Jeremy He2023-11-07T15:28:46+08:00AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steel has very high wear resistance against abrasive and adhesive wear.
P20 Steel Plate | 1.2311 | 3Cr2Mo | Plastic Mold Tool Steel
Jeremy He2023-11-07T15:32:56+08:00AISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling.
D2 Tool Steel | 1.2379 | X153CrMo12 | SKD11
Jeremy He2023-11-07T15:33:03+08:00AISI D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 is very wear resistant but not as tough as lower alloyed steels.
H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel
Jeremy He2024-06-17T15:00:40+08:00H13 Tool Steel is chromium hot-work tool steels. Due to H13 steel excellent combination of high toughness and fatigue resistance, AISI H13 hot work tool steel is used more than any other tool steel in tooling applications.